Description

This is an easy way how o replace your car battery, let's check it out.

1. Shut off your engine and engage the parking brake. You might want to lay a blanket or pad over the fender to protect against the corrosive battery acid and possible scratches.

2. Remove the cables from the battery terminals. Most vehicles have a negative ground rather than a positive ground. If it does, you should start there first. If your vehicle has positive ground, loosen it first. Use a wrench to loosen the nut and bolt on the clamp that holds the battery cable on the terminal. You don’t want to remove the bolts; just loosen them enough to release the cable clamps. Remove the cable and position it out of your way. Then remove the other cable and lay that aside.

3. As said by car battery expert at https://www.bestleisurebattery.co.uk/, Your battery should have some sort of brace or clamp holding it in place. Remove this now, but be careful when you remove the bolt or screw. Make sure you don’t drop it into the engine bay.

4. Remove the battery.

5. Clean the battery tray if it is dirty or has deposits. Use gloves. Usually, a little baking soda dissolved in water will do the trick. Make sure the tray is dry before continuing.

6. Place the new battery on the tray, making sure it is in the same orientation as the old one was.

7. Replace the brace or clamp that holds the battery in place. You want to check and make sure the battery is held firmly.

8. Replace the battery cables on the terminals, make sure you replace them in reverse order. If your vehicle has negative ground, the positive cable goes back first. Get the clamps tight and make sure they cant be wiggled loose.

9. Take the old battery to a recycling center that accepts batteries. Usually, the store or shop that you bought your new battery will dispose of your old one.

How to Replace Car Battery

Add your comment

Reply to:

Confirm copying